PT100 temperature transmitter
Model PT100 temperature transmitter It is made by heat. The resistance and temperature transmitter circuit module is composed of a two-wire system (that is, a pair of wires is both a power supply power line and a signal transmission line), with a nonlinear correction circuit, which can measure various media in the range of -50 ~ 150 ° C in the industrial process. To convert the temperature signal into a linear temperature signal. 4 ~ 20mADC; Current output signal, send display, Adjust recording instrument or DCS The system carries out distributed control.
PT100 temperature transmitter used in rail transit industry, can be used with moving coil instrument, digital display instrument, recording instrument, regulator, DCS system to form a variety of temperature measurement and control system.
Product Details
Technical parameters
Accuracy (including linearity, hysteresis, repeatability) : 0.5%
Measuring range: -50 ~ 150℃;
Output: 4 ~ 20mADC, linear relationship with measured temperature, two-wire transmission;
Power supply voltage: 7.5 ~ 30VDC, rated voltage 24VDC; 5. Impact of ambient temperature: 0.02%FS / ℃;
Load capacity: See the RL ~ Vs relationship in the figure below; The supply voltage is 24V When the load is 0 ~ 600;
Operating temperature range: -50 ~ +150℃ (high temperature environment type);
Relative humidity: 5 ~ 95%, no condensation;
Stability: Output change ≤1% within 12 months;
